Nitrous Outlet Mopar 85mm 6.4L HEMI Hardline Plate System
The Nitrous Outlet Mopar 85mm 6.4L HEMI Hardline Plate System is now available for purchase. This system includes all of the necessary components from the hard line, gaskets, jetting, hardware and wiring to install the system. System is capable of adding 200 HP to your Challenger, Charger, SRT-8 Jeep, and Chrysler 300C. However the system is capable flowing up to 400 HP with additional jetting. This system fits vehicles like the Jeep SRT-8, and also the Chrysler 300 SRT-8 with the 6.4L HEMI intake and 85mm throttle body.
This system includes a billet aluminum plate to fit 6.4L HEMI intakes with an 85mm throttle body. Plate is capable of flowing up to 400 HP of nitrous. Each billet plate has a black anodized finish with laser etched logo and fuel/nitrous labels. This injection plate has 6 specially designed nitrous and fuel discharge ports. These ports completely saturate the air intake charge for the best atomized mixture possible. For higher horsepower levels proper distribution into the air stream is critical for equal cylinder to cylinder distribution. Also included in this system is a wide open throttle (WOT) switch that only allows the system to be activated when the motor is at full throttle. This safety feature will prevent engine damage.
The Nitrous Outlet 6.4L HEMI Specific Nitrous system is the safest, best fitting, as well as the most tuner friendly system available. This system Fits the 6.4 HEMI platform, including vehicle specific solenoid brackets, pre-bent hardline, and application specific hardware. This provides for the best fitment and cleanest install on the market.
|Number of Stages||Single Stage|
|Max Flow (Per Stage)||400|
|Number of Solenoids||2|
|Nitrous Solenoid Size||.122 Orifice|
|Fuel Solenoid Size||.177 Orifice|
|Relay and Harness Included?||Yes|
|Fuel Adapter Fitting Included?||Yes|
|Included Jetting (in Horsepower)||50-100-150-200|
|Fuel Pressure||55 PSI|
|Single Or Dual Stage||Single Stage|
|Type Of Fuel Rail||Stock Fuel Rails|
|Solenoid Bracket(s)||Vehicle Specific|
|Main Feed Line Size||6AN|
|Hard or Soft Line (From Solenoids)||Hard Line|
|Vehicle Model||Challenger, Charger, LX/300C, SRT-8 Jeep|
|Vehicle Year||2012, 2013, 2014, 2015, 2016, 2017|
|Tech Info||Mopar 6.4L 85mm Plate System Installation Guide|